Broyeur de branches Stiler RĘBAK ROZDRABNIACZ CIĄGNIKOWY 250 MM, TRACTOR DISC WOOD CHIPPER neuf

The STILER BX 102R disc chipper is used for shredding branches and tree trunks with a diameter of up to 25 cm.

WITH BUILT-IN HYDRAULIC SYSTEM (PUMP AND HYDRAULIC TANK).

Newer reinforced model.

EQUIPPED WITH A NEW GENERATION HYDRAULIC SYSTEM WITH RELIABLE DISTRIBUTORS !!!

4 knives sharpened on both sides ensure very high efficiency and service life of the machine. The blades are made of hard tool steel. The machine has 1 counter blade.

The back of the disc is equipped with breakers and ejection shovels for more efficient ejection of chips from the machine

The machine has two hydraulic pickup rollers. They speed up the work and make it easier to feed the branches onto the shield. In addition, the machine has 10 feeding speeds and a reverse gear for retracting the branches.

The rotation is transmitted through the power take-off shaft which connects the machine directly to the tractor shaft. The minimum required shaft speed is 540 rpm.

The machine is equipped with a three-point linkage system.

The 360° rotating chip ejection allows you to direct the stream in any direction.
Specification:

The material collection system consists of two shafts driven hydraulically by a built-in pump.
The material collection mechanism has a 10-step collection speed regulator and a material dispensing function.
The drive of the hydraulic system comes from the tractor's hydraulic outputs (fastened with quick couplers)
The chipper has a massive disc with a diameter of 940 cm
There are 4 double-sided cutting knives on the disc.
In addition, a counter knife is mounted on the shield cover.
The design of the rotor allows for long-term operation without load on the tractor.
All bearings protected against dust, chipping, etc. are lubricated through easily accessible nipples.
There are also breakers (shovels) on the disc that crush the obtained clearcut to the value of 20-60 mm.
The chipper with a three-point suspension system (TUZ) is designed to work with a farm tractor with a minimum power of 80 HP.
The drive from the tractor to the chipper is transferred by means of a transmission shaft equipped with a safety pin, which is cut off in the event of too much load on the machine and disconnects the direct drive.
The produced chips are thrown through a pipe rotated by 360° in relation to the base of the chipper.
The resulting chip has dimensions from 20mm to 60mm
The set also includes the PTO shaft

Technical data:

Model: BX102R

The size of the shredded material: 25 cm in diameter

Drivetrain: Driven by the tractor's engine via the PTO

Minimum tractor power: 80 hp

Rotor size: 940 cm

Number of cutting knives: 4 + 1 counter blade

Knife type: Hardened CR12 tool steel

Rotor weight: 170 kg

Material feeding mechanism: Built-in pump and tank, two intake rollers

Mounting system: Three-point linkage (TUZ)

Dimensions: 240 cm L x 130 cm W x 285 cm H

Feeding hopper: 92 x 85 cm

Throwing tube rotation range: 360°

Throwing tube height: 285 cm

Rated revolutions per minute/Rated revolutions: 540-1000

Chipper weight: 870 kg